PRODUCT FAMILY
Blue Line Gen2 PIR Motion Detectors
- Wall to Wall coverage – Superior catch performance within 12 m x 12 m (40 ft x 40 ft) coverage area
- Pet‑friendly Selectable model available – optimize installation for pet (20 kg [45 lb]) and non‑pet applications
- Dynamic Temperature Compensation – superior catch performance in any environment
- Flexible Mounting Height, No Adjustments – reduce installation time and false alarms, improve catch performance
- Self-locking Enclosure with Integrated Bubble Level – reduce installation time




PRODUCT FAMILY
Commercial Contacts
- Closed loop
- Ideal for steel doors
- Wide gap deters swinging
PRODUCT FAMILY
Commercial Series Gen 2 TriTech AM Motion Detectors with Anti-mask
- TriTech AM models include active infrared anti-mask.
- C2DT: Cloak and Camouflage Detection Technology maximizes catch performance against intruders attempting to cover their infrared signal.
- EOL Resistors and mounting height.
- MEMS inside. Tamper and Impact stability.
- Active white light suppression.








PRODUCT FAMILY
Commercial Series Gen2 TriTech Motion Detectors
- TriTech. Passive infrared and microwave Doppler radar detection with First Step Processing.
- C2DT: Cloak and Camouflage Detection Technology maximizes catch performance against intruders attempting to cover their infrared signal.
- Flexible Mounting Height and Integrated EOL resistors.
- Intelligent tamper and impact detection using a MEMS accelerometer.
- Active white light suppression.






PRODUCT FAMILY
Compact Contacts with Standard Magnet
- Closed loop
- Sensitive non-stick rhodium reed
- Bent long leads keep solder off the glass of the reed
- Two solder points on the wire
- Thick plastic shell resists crushing
Contact, metal
Commercial Type No.: ISN-CMET-200AR | Product No.: F.01U.004.900
- Closed loop
- Wide gap
- Ideal for commercial applications
PRODUCT FAMILY
DS1101i Series Glassbreak Detectors
- Microprocessor-based sound analysis technology (SAT)
- Automatic environmental test circuitry
- Sound check
PRODUCT FAMILY
DS1102i Series Glassbreak Detectors
- Microprocessor-based sound analysis technology (SAT)
- Automatic environmental test circuitry
- Sound check
PRODUCT FAMILY
DS150i Series Request-to-exit Detectors
- Single or double door use
- Wall or ceiling mountable
- Internal vertical pointability
- Wrap-around coverage pattern
- Selectable relay trigger mode
- Selectable fail safe/fail secure modes


PRODUCT FAMILY
DS160 Series High Performance Request‑to‑exit Detectors
- Door monitor with sounder alert
- Sequential Logic Input (SLI)
- Internal vertical pointability
- Wrap-around coverage pattern with precise pattern control
- Up to 64 second adjustable latch time
- Selectable relay trigger mode
- Selectable fail safe/fail secure modes
- Adjustable sounder volume
- Activation LED


PRODUCT FAMILY
DS939 Series Panoramic Detectors
- Up to 6.1 m (20 ft) mounting height
- Fully adjustable optics for coverage integrity and customization
- Hinged chassis and base plate for easy installation
- High efficiency LED and light pipe system for easy walk testing
- First Step Processing (FSP)
PRODUCT FAMILY
Flange Mount Contacts with Side Leads
- Closed loop
- Flange mount with special adhesive
- Side leads
Glassbreak detector, flush
Commercial Type No.: DS1103I | Product No.: F.01U.413.582
- Microprocessor-based sound analysis technology (SAT)
- Automatic environmental test circuitry
- Sound check
- Flush mounting
Glassbreak detector, frame-mount
Commercial Type No.: DS1109I | Product No.: F.01U.413.583
- Microprocessor-based sound analysis technology (SAT)
- Automatic environmental test circuitry
- Built-in door or window contact
Glassbreak tester
Commercial Type No.: DS1110I | Product No.: 4.998.800.270
- Manual and automatic testing functions
- Identifies proper mounting location
Professional Series PIR
Motion detector, 60ft (18m)
Commercial Type No.: ISC-PPR1-W16 | Product No.: F.01U.382.059
- 18 m x 25 m (60 ft x 80 ft) standard coverage; 8 m x 10 m (25 ft x 33 ft) selectable short range coverage
- Sensor data fusion technology
- Tri-focus optics technology
- Active white light suppression
- Dynamic temperature compensation
- Remote walk test
- Alarm memory
- Draft and insect immunity
- 2 m to 3 m (7 ft to 10 ft) mounting height, no adjustments required
Classic Line PIR
Motion detector, long range, 200ft (60m)
Commercial Type No.: DS778 | Product No.: 4.998.800.223
- Motion Analyzer II processing
- Pointable mirrored optics
- Q-map signal processing
- Long range coverage
- Four mounting options
PRODUCT FAMILY
OD850 Series Outdoor TriTech Detectors
- Motion Analyzer II PIR signal processing
- Small animal, draft and insect immunity
- Linear travel distance (LTD) microwave signal processing
- Two sensitivity levels
- Timed relay output adjustable from two sec to 10 min
- AND/OR mode


Overhead door contact, closed loop
Commercial Type No.: ISN-CMET-4418 | Product No.: F.01U.004.899
- Closed loop
- Pin holds armored cable firmly in place
- Includes adjustable magnetic assembly bracket
- Ten installation options for the magnet
Overhead door contact, track mount
Commercial Type No.: ISN-C66 | Product No.: F.01U.004.921
- Closed loop
- Mounts on door tracks
- Sturdy and solid
- Four-way magnet bracket
- Installs better and faster than standard overhead contacts
Blue Line Gen2 Quad
PIR Motion detector, 40ft (12m)
Commercial Type No.: ISC-BPQ2-W12 | Product No.: F.01U.364.871
- Dynamic Temperature Compensation – superior catch performance in any environment
- Wall to Wall Coverage – superior catch performance
- Flexible Mounting Height, No Adjustments – reduce installation time and false alarms, improve catch performance
- Self-locking Enclosure with Integrated Bubble Level – reduce installation time
PRODUCT FAMILY
RADION contact RM
- Self-contained transmitter with magnetic reed switch contact
- Concealed, recessed mounting in doors or windows for unobtrusive security
- Operational up to 5 years using a single user replaceable AAA Lithium battery
- Supervised for low-battery and cover-tamper conditions




PRODUCT FAMILY
RADION contact SM
- Internal magnetic reed switch contact
- Supervised for low-battery, cover-tamper, and removal from mounting surface
- Operational up to 5 years using a single, user replaceable Lithium AAA battery




PRODUCT FAMILY
RADION panic
- Water and dust resistant
- Sends panic alarms by user for unique identification
- Single-button or two-button versions, reduces false activations
- Up to 5 year battery life
- Supervised for low battery and removal from monitored areas


PRODUCT FAMILY
RADION PIR and PIR C
- Two models are available, PIR and PIR C for hallways and corridors
- Flexible Mounting Height
- Pet immunity
- Operational up to 5 years with one user replaceable CR123A battery
- Supervised for low-battery, cover-tamper, and removal from mounting surface tamper conditions





Shock sensor
Commercial Type No.: ISC-SK10 | Product No.: F.01U.306.235
- Intelligent 3-axis vibration detection
- Self-learning mode
- Dual-color LED indicator
- Adjustable sensitivity
- Slim design for easy installation
PRODUCT FAMILY
Standard and Wide Gap Contacts
- Closed loop
- Standard industry size
- Spacers, screws, and cover included
PRODUCT FAMILY
Terminal Connection Contacts (19 mm)
- Closed loop
- Terminal connection design
- Does not require soldering or splicing
- Steel door recess type
Trim plate for DS150 and DS160
Commercial Type No.: TP160 | Product No.: F.01U.416.271
- Matches light gray surfaces for mounting a detector over a standard single-gang box
Trim plate for DS151 and DS161, black
Commercial Type No.: TP161 | Product No.: 4.998.130.552
- Matches black surfaces for mounting a detector over a standard single-gang box
RADION inertia
Wireless vibration sensor w/loop input
Commercial Type No.: RF3405E | Product No.: 4.998.126.451
- Internal magnetic reed switch
- Supervised external loop
- Gross or minor attack movement settings
- Test mode
Housing, flush mount, w. magnet, EG2
Commercial Type No.: 4998138932 | Product No.: 4.998.138.932
- Suitable for built-in magnetic contacts
- Mounting in ferromagnetic materials
- Head-on installation
Magnetic contact surface for MSA-LZ6W
Commercial Type No.: MSA-LZ | Product No.: 4.998.133.929
- Conventional surface-mount magnetic contact
- VdS class B
- Parallel or head-on surface mounting
- Conventional perimeter protection
Magnetic contact surface for MSA-LZS6W
Commercial Type No.: 4998133931 | Product No.: 4.998.133.931
- Conventional surface-mount magnetic contact
- VdS class C
- Tamper switch
- Parallel or head-on surface mounting
- Conventional perimeter protection