PRODUCT FAMILY
Terminal Connection Contacts (19 mm)
- Closed loop
- Terminal connection design
- Does not require soldering or splicing
- Steel door recess type
Beam smoke detector, 24V
Commercial Type No.: FCB-350 | Product No.: F.01U.397.741
- Provides 60 feet on center linear protection at a range of 32.8 ft to 328 ft
- Easy setup and alignment with signal strength LEDs
- Automatic compensation for signal drift or dirty lens
- Emitter and receiver are labeled and color-coded red and green for easy recognition
Beam smoke test filters
Commercial Type No.: FME-350 | Product No.: F.01U.397.742
- Four calibrated neutral density filters
- Clip to hold filter and mount on pole
Break rods, scored acrylic, 12pcs
Commercial Type No.: FMM-100GR | Product No.: 4.998.155.098
- Scored for clean breaking
- Lightweight acrylic
- Comes in packages of 12
CO detector (Macurco CM-E1)
Commercial Type No.: FCC-380 | Product No.: F.01U.172.606
- Solid state sensor provides maintenance-free operation
- Microcomputer control provides virtual automatic operation
- 9 VDC to 32 VDC operation is compatible with 12 V and 24 V systems
- Can quickly test CO sensor on site
- Three-color LED status display
- Four‑wire technology for connection to any UL Listed control panel
PRODUCT FAMILY
DS794Z and ZX794Z Series Long Range PIR Detectors
- Motion Analyzer II processing
- Motion monitor
- PIR supervision
- Self-test supervision systems
- Field-replaceable optics
- Three coverage patterns



PRODUCT FAMILY
DS936 Low Profile Panoramic PIR Detector
- Enhanced signal processing
- 360° x 7.5 m (24 ft) pattern
- Surface/semi-flush mountable

PRODUCT FAMILY
DS9370/DS9371 Series Panoramic TriTech Ceiling Mount Detectors
- Up to 6.1 m (20 ft) mounting height
- Fully adjustable optics for coverage integrity and customization
- Hinged chassis and base plate for easy installation
- High efficiency LED and light pipe system for easy walk testing
- First Step processing, or FSP




Duct smoke detector
Commercial Type No.: FCD-350 | Product No.: F.01U.397.735
- Detects smoke within HVAC ducts
- New Rugged Durable Housing
- Easy Smoke Testing Port
- Removable Terminal Cover
Duct smoke detector head, photo
Commercial Type No.: FCD-350-DH | Product No.: F.01U.397.736
- Computer-designed non-directional smoke chamber
- 360° view of detector status LED
- Highly stable operation, RF/Transient protection
- One built-in power/sensitivity supervision/alarm LED
PRODUCT FAMILY
FCA-350 Detector Base Series
- Use for 2-wire (12 VDC or 24 VDC system) applications
- Easy installation
- Interchangeable detector heads


PRODUCT FAMILY
FCH-350 Heat Detectors
- Fixed temperature/rate-of-rise 135°F or 190°F heat detector
- 2-wire, 4-wire, and POPIT base compatibility
- Highly stable operation, RF/Transient protection
- Two built-in power/alarm LED's for 360° viewing
- Power/alarm LED's confirm detector status


PRODUCT FAMILY
FCP-350 Smoke Detector Head Series
- Wide viewing angle alarm indicators
- Automatic drift compensation and maintenance indication
- Built-in magnetic test feature
- Optimized reduction to false alarms and enhanced reaction time to real fires


PRODUCT FAMILY
FMM‑462 Family POPIT Addressable Manual Stations
- Single‑gang mounting
- Latching alarm lever and key‑locked reset
- Rugged die‑cast housing with 14 gauge (1.9 mm) plated steel back and corrosion‑resistant construction
- Optional scored acrylic breakrod
Glassbreak detector, frame-mount
Commercial Type No.: DS1109I | Product No.: F.01U.413.583
- Microprocessor-based sound analysis technology (SAT)
- Automatic environmental test circuitry
- Built-in door or window contact
PRODUCT FAMILY
ISN-SM Seismic Detectors
- 24-hour surveillance of vault walls and doors, safes, night safes, and automatic teller machines
- Sensitivity settings using DIP switches
- SENSTEC® sensor and signal processing system based on microcontrollers
- Low profile design
MUX PIR
Motion detector, 35ft (11m)
Commercial Type No.: MX934I | Product No.: 4.998.126.349
- Motion Analyzer II processing
- Unique address switch settings
- Insect and draft immunity
- Three sensitivity settings
POPEX PIR
Motion detector, pet friendly 35ft (11m)
Commercial Type No.: ZX835 | Product No.: 4.998.126.661
- Point of protection intrusion transponder (POPIT)
- Tamper switch
- Two PIR sensitivity settings
- Four mounting options
- Immunity to certain animals, insects, and drafts
- 26 coverage zones including an optional look-down zone
- Advanced signal processing
PRODUCT FAMILY
OD850 Series Outdoor TriTech Detectors
- Motion Analyzer II PIR signal processing
- Linear travel distance (LTD) microwave signal processing
- Two sensitivity levels
- Timed relay output adjustable from two sec to 10 min
- AND/OR mode
- Draft and insect immunity


PRODUCT FAMILY
Professional Series PIR Motion Detectors with Anti‑mask
- 16 m x 21 m (50 ft x 70 ft) standard coverage; 8 m x 10 m (25 ft x 33 ft) selectable short range coverage
- Sensor data fusion technology
- Tri-focus optics technology
- MANTIS anti-mask
- Active white light suppression
- Dynamic temperature compensation
- Remote walk test
- Alarm memory
- Draft and insect immunity
- 2 m to 3 m (7 ft to 10 ft) mounting height, no adjustments required




Remote test/indicator plate, 24V
Commercial Type No.: D305 | Product No.: F.01U.020.620
- Keyed test/reset switch
- Green pilot LED, red alarm LED
- Uses single‑gang back box
Sample tube, duct 10'/304.8cm
Commercial Type No.: FAA-325-10 | Product No.: F.01U.133.077
- Metal tube with air sampling holes
- Tubes connect to each other and to housing using standard ½” collets
- End plug provided
Sample tube, duct 2.5'/76.2cm
Commercial Type No.: FAA-325-2.5 | Product No.: F.01U.133.075
- Metal tube with air sampling holes
- Tubes connect to each other and to housing using standard ½” collets
- End plug provided
Sample tube, duct 5'/152.4cm
Commercial Type No.: FAA-325-5 | Product No.: F.01U.133.076
- Metal tube with air sampling holes
- Tubes connect to each other and to housing using standard ½” collets
- End plug provided
Spacer for RADION contact, 10pcs
Commercial Type No.: RFAC-DW-10 | Product No.: F.01U.310.604
- Improves magnet-reed switch alignment and gap distance, making installations easier while reducing false alarms
- Full support for the wall mount tamper feature
- Location pins for easy alignment and stacking
- Durable plastic matches detector for attractive appearance
- Each spacer is 3 mm (0.12 in) thick and sold in kits of 10 matching pieces (contact and magnet)
Spacer for RADION universal TX, 10pcs
Commercial Type No.: RFAC-UN-10 | Product No.: F.01U.312.299
- Improves magnet-reed switch alignment and gap distance, making installations easier while reducing false alarms
- Full support for the wall mount tamper feature
- Location pins for easy alignment and stacking
- Durable plastic matches detector for attractive appearance
- Each spacer is 3 mm (0.12 in) thick and sold in kits of 10 matching pieces (contact and magnet)
Surface backbox, 4.75x3.25x2.25", red
Commercial Type No.: FMM-100BB-R | Product No.: F.01U.000.557
- Red sheet-metal back box for interior surface-mount applications
- Knockouts (1/2-inch) on the short sides
Trim plate for DS151 and DS161, black
Commercial Type No.: TP161 | Product No.: 4.998.130.552
- Matches black surfaces for mounting a detector over a standard single-gang box
Wireless detector, pet friendly no radio
Commercial Type No.: RF940U | Product No.: 4.998.140.520
- Space for an OEM RF module
- Wall and cover tampers
- Walk-Test LED
- Dynamic temperature compensation
- Wall or corner mount; optional swivel or ceiling bracket
- User-replaceable readily-obtainable 3 V lithium battery
- Pet Friendly® pet immunity