Motion detector, long range, 200ft (60m)
CTN: DS794Z | Product No.: 4.998.800.027Key Specifications
| Dimensions: | 14Â cm x 21Â cm x 14Â cm (5Â in. x 7.5Â in. x 5Â in.) |
| Material: | High impact ABS plastic enclosure |
| Operating Temperature: | -29°C to +49°C (-20°F to +120°F) For UL Certificated installations, 0°C to +49°C (+32°F to +120°F) |
| Radio Frequency Interference (RFI) Immunity: | No alarm or setup on critical frequencies in the range from 26Â MHz to 950Â MHz at 50Â V/m. |
| DS794ZE: | Complies with Environmental Class II (EN50130-5) |
| Height: | 5Â m (15Â ft.) maximum |
| Location: | Surface or corner |
| Current Draw: | 18 mA at 12 VDC 25 mA at 12 VDC (DS794ZE) |
| Voltage (Input): | 6 VDC to 15 VDC ZX794Z: Power comes from two-wire Zonex Bus. <0.5Â mA nominal, 2Â mA in alarm with LEDs enabled. Do not leave Walk Test LEDs enabled. |
| Alarm: | ZX794Z: Signal through POPIT data bus. |
| Tamper: | Normally-closed (with cover in place). Contacts rated at 28Â VDC, 125Â mA maximum. |
| Trouble: | Solid state output, shorts to negative when activated. Maximum current load is 25Â mA. |
Parts included with this product
| Quantity | Component |
|---|---|
| 1 | DS794Z Long‑range PIR intrusion detector |
| 1 | OA200 Mirror |
| 1 | OA80 Mirror |